Vanguard CT-7000-3 Digital Circuit Breaker Analyzer

No stress rentals! We help you to choose the equipment that you need, we expedite shipment, and follow up to make sure that your testing is going smoothly!

Vanguard CT-7000-3 Digital Circuit Breaker Analyzer
  • Application

  • The Vanguard CT-7000 analyzes the performance of circuit breakers by testing the contact time, stroke, velocity, over-travel, and contact wipe. Contact motion analysis can be performed for all circuit breaker operations.
  • Key Features

  • Measures circuit-breaker motion
  • Monitors Coil Voltage and On/Off status of the breaker
  • Detects main contact and IR contact times in msec. and cycles
  • Measures circuit-breaker velocity, stroke, over-travel, & bounce-back
  • Initiate Open, Close, Open-Close, Close-Open, Open-Close-Open

Specifications
Input Power 100 to 240 Vac 50/60 Hz
Dry-contact inputs 3, 6, or 12 dry-input channels (depending on model)
Each channel detects main and insertion resistor contacts
Timing windows 1 second, 10 seconds, or 20 seconds
Timing resolutions ±50 μsec. @ 1 sec. duration, ± 500 μsec. @ 10 sec. duration, ± 1.0 msec. @ 20 sec. duration
Timing accuracy 0.05% of reading ±0.05 ms @ 1 second duration
Dry-contact channel protection All contact inputs are grounded until test; input channels are protected against static discharge
Resistor detection range 50 to 5,000 Ω
CT Current Sensor one, non-contact, 0 to 100 amperes
Trigger input voltage Open/Close: 30 to 300 V, DC or peak AC
Voltage sensing input range V1: Analog input; 0 to 255 V DC or peak AC; sensitivity ± 1 V
V2: voltage presence/absence detector input; 30 to 300 V DC or peak AC
Breaker operations Initiate Open, Close, Open-Close, Close-Open, Open-Close-Open
Breaker initiate capacity 30A, 250 Vac/dc max
Initiate current reading range One, non-contact, Hall-effect sensor, 0 to 20 A range, DC to 5 KHz
Digital travel transducer inputs 3 digital travel transducer channels
Linear range: 0.0 to 60.0 in (± 0.01 in)
Rotary range: 0 to 360 degrees (± 0.36 degrees)
Optional resistor type transducer input One channel, resistance range: 200Ω to 10 kΩ
Contact travel point difference Measures slow-close contact-point distances; results can be printed
Display Back-lit LCD screen (20 characters by 4 lines); viewable in bright sunlight and low light
Printer Built-in 4½ in wide Thermal Printer that prints both waveforms and tabulated test results
Internal test record storage Stores up to 150 test records and 99 test plans
Computer interfaces One RS-232C port, one USB port
PC software Windows® based Breaker Analysis software
Safety Designed to meet UL 6101A-1 and CAN/CSA C22.2 No 1010.1-92 standards
Environment Operating: -10°C to 50°C (15°F to 122°F)
Storage: -30°C to 70°C (-22°F to 158°F)
Humidity 90% RH @ 40°C (104°F) non-condensing
Altitude 2,000 m (6,562 ft) to full safety specifications
Cables Furnished with full set of test leads (including 20-foot contact leads and 30-foot contact lead extensions)
Options Transportation case (available for the CT-7500 S2 and travel transducers)