|
TES-3040 Clamp Meter
Request
a Quotation
Back to Clamp Meters
AC/DC Clamp
Meter
MODEL: TES-3040
|
TES-3040 AC/DC Clamp Meter - Price: $175.00
|
|
 |
- Peak
Hold/Data Hold function
- Autoranging on V, Ω, A, Hz
- Bar- Graph indication
- 3 ¾ digit LCD with Bar-graph
- Auto-power off and Data Hold mode
- MAX/MIN Hold mode
- Zero
Adjustment/Relative Reading
-
Warranty: Two years
- Price: $175.00 US dollars
|
SPECIFICATIONS: (23°C ± 5°C)
AC Current: (Autorange and Manual. Overload protection 1100A)
| Range |
Resolution |
Accuracy |
Frequency response |
| 400A |
100mA |
± (2.0% + 1dgt) |
40Hz to 450Hz |
| 1000A |
1A |
± (2.0% + 1dgt) |
40Hz to 450Hz |
DC Voltage: (Autorange and Manual. Overload protection 660Vrms)
| Range |
Resolution |
Accuracy |
Input impedance |
| 400mV |
0.1mV |
± (0.75% + 2dgts) |
≥ 1000MΩ |
| 4V |
1mV |
± (0.75% + 2dgts) |
≅ 11MΩ |
| 40V |
10mV |
± (0.75% + 2dgts) |
≅ 10MΩ |
| 400V |
0.1V |
± (0.75% + 2dgts) |
≅ 10MΩ |
| 600V |
1V |
± (0.75% + 2dgts) |
≅ 10MΩ |
AC Voltage: (Autorange and Manual; Overload protection 660Vrms
Frequency response 40Hz to 450Hz)
| Range |
Resolution |
Accuracy |
Input impedance |
| 4V |
1mV |
± (1.2% + 5dgts) |
≅ 11MΩ |
| 40V |
10mV |
± (1.2% + 5dgts) |
≅ 10MΩ |
| 400V |
0.1V |
± (1.2% + 5dgts) |
≅ 10MΩ |
| 600V |
1V |
± (1.5% + 5dgts) |
≅ 10MΩ |
Frequency: (Autorange for Voltage; Overload protection 660Vrms)
| Range |
Resolution |
Accuracy |
Sensitivity |
| 100Hz |
0.01Hz |
± (0.1% + 2dgts) |
100mV |
| 1kHz |
0.1Hz |
± (0.1% + 2dgts) |
100mV |
| 10kHz |
1Hz |
± (0.1% + 2dgts) |
100mV |
| 100kHz |
10Hz |
± (0.1% + 2dgts) |
100mV |
| 800kHz |
100Hz |
± (0.1% + 2dgts) |
1V |
Frequency: (Autorange for Current; Overload protection 1100A)
| Range |
Resolution |
Accuracy |
Sensitivity |
| 100Hz |
0.01Hz |
± (0.5% + 5dgts) |
5A |
| 1kHz |
0.1Hz |
± (0.5% + 5dgts) |
5A |
Resistance: (Autorange and Manual. Overload protection 660Vrms)
| Range |
Resolution |
Accuracy |
Open circuit voltage |
| 400Ω |
0.1Ω |
± (1.0% ± 5dgts) |
≤ 0.05VDC |
| 4kΩ |
1Ω |
± (1.0% ± 3dgts) |
≤ 0.05VDC |
| 40kΩ |
10Ω |
± (1.0% ± 3dgts) |
≤ 0.05VDC |
| 400kΩ |
100Ω |
± (1.0% ± 3dgts) |
≤ 0.05VDC |
| 4MΩ |
1kΩ |
± (1.0% ± 3dgts) |
≤ 0.05VDC |
| 40MΩ |
10kΩ |
± (1.5% ± 3dgts) |
≤ 0.05VDC |
General specifications:
| Applicable standards |
IEC 1010, CAT III 600V, Pollution Degree 2 |
| Jaw opening |
46mm maximum |
| Display |
3¾ digit LCD with 40 segment bar graph
Maximum reading 3999 |
| Diode test |
Resolution: 1mV; Accuracy: ± (1% + 2 dgts) |
| Audible continuity |
Beeper: ≤ 40Ω; Open circuit voltage: ≤ 0.5V |
| Operating temperature |
0°C to 40°C |
| Dimensions |
239(L) x 66(W) x 34(H)mm, (9.4" x 2.6" x 1.34") |
| Weight |
365g (batteries included), 12.9oz |
| Accessories included |
User's Manual, 9V Battery, Safety Test Leads, Carrying Case |
This instrument is usually shipped within 48 hours. You can buy it now at a secure site by clicking on the button below, or by calling (800) 268-4928.
|
TES-3040 AC/DC Clamp Meter - Price: $175.00
|
|
Request
a Quotation
Back to Clamp Meters
Instrumentation
Sales & Rentals
"The Ultimate Source of Quality Test Equipment"
|
PO Box 10188, 27 Legend Court
Ancaster, ON L9K 1P3 Canada
|
600
Main Street, PO Box 888
Tonawanda, NY 14151 USA
|
Phone: (800) 268-4928 or (905) 667-3991
Fax: (877) 336-8108 or (905) 304-6541
|
