Prova 2000 AC/DC Clamp Meter

Request a Quotation
Back to Clamp Meters

AC/DC Clamp Meter
MODEL: Prova-2000

Prova 2000 Clamp Meter - Price: $450.00

DC 2500A, AC 2100A 55mm dia., Bus Bar 65mm x 24mm True RMS, Autorange, Diode test Integrated Current Probe with analog output for Chart Recorder or Oscilloscope 3¾ digit display with fast bar graph 4000 counts of resolution Max/Min/Hold & Continuity Relative Measurement Warranty: Two years Price: $450.00 US dollars

SPECIFICATIONS: (23°C ± 5°C)
DC Current

Range	Resolution	Accuracy (of rdg)	Overload Protection
400A	0.1A	± 1.5% ± 3dgts	3000 amps DC
0-2000A	1A	± 1.5% ± 3dgts	3000 amps DC
2000-2500A	1A	± 2.0% ± 3dgts	3000 amps DC

AC Current: (True RMS, Crest factor < 4)

		Accuracy (of rdg)		Overload Protection
Range	Resolution	50/60 Hz	40Hz - 1kHz
400A	0.1A	± 1.5% ± 5dgts	± 2.0% ± 5dgts	3000 amps AC
0-1000A	1A	± 2.0% ± 5dgts	± 2.5% ± 5dgts	3000 amps AC
1000-2100A	1A	± 2.5% ± 5dgts	± 3.0% ± 5dgts	3000 amps AC

Analog Output Current:

Range	Output	Accuracy	Overload Protection
0-400A	1mV/A	± 2.5% ± 0.5A	600 volts AC
400A-2100A	1mV/A	± 2.5% ± 5A	600 volts AC

DC Voltage: (Autorange & Manual. Overload protection 800VAC for all ranges)

Range	Resolution	Accuracy (of rdg)	Input Impedance
40mV	0.1 mV	± 1.5% ± 3dgts	10MΩ
4V	1 mV	± 1.5% ± 3dgts	5MΩ
40V	10 mV	± 1.5% ± 3dgts	5MΩ
400V	100 mV	± 1.5% ± 3dgts	5MΩ
600V	1V	± 1.5% ± 3dgts	5MΩ

AC Voltage: (True RMS, Crest Factor < 4. Input impedance 5 MΩ)

		Accuracy		Overload Protection
Range	Resolution	50/60 Hz	40Hz - 1kHz
400mV	0.1mV	--------1	--------1	--------1
4V	1 mV	± 1.5% ± 5dgts	± 2.0% ± 5dgts	800 volts AC
40V	10 mV	± 1.5% ± 5dgts	± 2.0% ± 5dgts	800 volts AC
400V	100 mV	± 1.5% ± 5dgts	± 2.0% ± 5dgts	800 volts AC
600V	1V	± 1.5% ± 5dgts	± 2.0% ± 5dgts	800 volts AC

¹Although 400mV AC can be selected by the RANGE key, the Prova 2000 is not designed to measure AC millivolts. Consequently no accuracy is listed for the 400mV AC range. For accurate millivolt measurements, see: Multimeters

Resistance: (Autorange & Manual. Open Circuit Voltage ≤ 0.5V)

Range	Resolution	Accuracy	Overload Protection
400Ω	0.1Ω	± 1.5% ± 3dgts	600 volts AC
4kΩ	1Ω	± 1.5% ± 3dgts	600 volts AC
40kΩ	10Ω	± 1.5% ± 3dgts	600 volts AC
400kΩ	100Ω	± 1.5% ± 3dgts	600 volts AC
4MΩ	1kΩ	± 1.5% ± 3dgts	600 volts AC
40MΩ	10kΩ	± 1.5% ± 3dgts	600 volts AC

Continuity: (Overload protection 600VAC. Open circuit voltage 0.4V)

Range	Resolution	Accuracy	Beeping
40Ω-400Ω	0.1Ω	± 1.0% ± 2dgts	< 40.0Ω

Diode Test:

Range	Resolution	Accuracy	Overload Protection
3V	0.001V	± 2.5% ± 5dgts	600 volts AC

Frequency: (OL protection 600VAC. Sensitivity selected with RANGE button)

Range	Resolution	Accuracy	Sensitivity
100Hz-1000kHz	0.01Hz - 100Hz	± 0.5% ± 2dgts	10mV/100mV/1V

General specifications:

Applicable standards	EN 61010-2-032, CAT III 600V, Pollution Degree 2
Conductor size	Cable diameter 55mm approximately (2.2") Bus Bar 65mm(D) x 24mm(W), (2.6" x 0.9")
Display	3¾ digit LCD with 40 segment bar graph
Operating temperature	4°C to 50°C
Dimensions	271(L) x 112(W) x 46(H)mm, (10.7" x 4.4" x 1.8")
Weight	647g (batteries included), (1½ lb approx.)
Accessories included	User's Manual, 9V battery, Carrying Bag

This instrument is usually shipped within 48 hours. You can buy it now at a secure site by clicking on the button below, or by calling (800) 268-4928.

Request a Quotation
Back to Clamp Meters