Some of the rental equipment on this page may also be available for sale. If you would like to purchase any of these rental assets, please check with us to find out if the instrument that you need is available for sale. If you need to purchase new equipment, please browse the New Equipment Catalogue.
Keithley
181 Programmable Nanovoltmeter
5.5-6.5
dig. DC volt range: 2mV-1000V with 10nV sensitivity. Input capacitance:
5000pf on mV range. Unit is fully programmable on the IEEE-488 bus.
Front panel controls are programmable. Makes measurements down to
10nV with only 30nV noise in a single conversion.
Keithley
182 Sensitive Digital Voltmeter
High
input resistance: > 1GΩ at 6.5 digits. 100 readings per second.
1nV sensitivity. Maximum output +3V.
Keithley
195A 5½ Digit DMM
3.5
to 5.5 digit resolution; 100nV, 100pA, 100Ω, 0.01°C or °F
sensitivity; 100-reading data buffer.
More Digital Multimeters ...
Keithley
196 6.5 Digit DMM
A
DMM with 6.5 digit resolution with excellent sensitivity, linearity,
and accuracy. Measures DC volts (300mV - 300V); AC volts (300mV
300V); Resistance (300µΩ - 300mΩ); DC amps (300µA -
3A); Manual or auto ranging; trigger.
Keithley
480 Picoammeter
LED
display, 1pA resolution, analog output. Measures DC current from
1pA per digit (2nA full range) to 2mA with 3.5 digit precision.
Keithley
485 Autoranging Digital Picoammeter
0.1pA
sensitivity; 200mV maximum voltage burden; log 1 readings; 4.5 digit
display; BNC input; banana jack output.
Keithley
580 Micro-Ohmmeter
Measures
from 10µΩ to 200kΩ with 4.5 dig resolution. Configuration:
4-wire (2-sense, 20 source). Max. source voltage: 20mV in dry circuit
test, 1V otherwise. Conversion rate: 3 readings/s typical. Has both
auto and manual ranging. IEEE-488 interface. Option 5802: Isolated
analog output/IEEE-488 interface.
More Micro-Ohmmeters ...
Keithley
610C Analog Electrometer
DC
voltage ranges cover 1mV - 1000V. DC current ranges: 10-14A to 0.3A.
Resistance range 100Ω to 1014Ω.
Keithley
614 Electrometer
Five
digit LED display with decimal point, polarity, and overload indication.
Conversion time: 400ms. Analog output: 2V out for full range input.
Output impedance: 10kΩ.
Keithley
617 Programmable Electrometer
4.5
digit. IEEE-488. DC range: 200mV - 200V. Current range: 2pA - 20mA.
Resistance: 2kΩ - 200GΩ. Volt source: -102V to +102V in 50mV steps.
Input conn.: 2 lug triaxial. 2V analog output.
Request
a Quotation
Back to list of Manufacturers
Instrumentation
Sales & Rentals
"The Ultimate Source of Quality Test Equipment"
|
PO Box 10188, 27 Legend Court
Ancaster, ON L9K 1P3 Canada
|
600
Main Street, PO Box 888
Tonawanda, NY 14151 USA
|
Phone: (800) 268-4928 or (905) 667-3991
Fax: (877) 336-8108 or (905) 304-6541
