Advantest Q8347 Optical Spectrum Analyzer
Measurement range (wave length): 350nm to 1750nm; Measurement range (level): -65 to + 10dBm; Input sensitivity: -52 to + 10dBm; Accuracy: <2.0dB.

Advantest Q8381A Optical Spectrum Analyzer
Measurement range (wavelength): 0.35 to 1.75µm. Resolution: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0nm. Accuracy: ±0.5nm. Measurement range (level): -85 to + 10dBm. Dynamic range: 40dB or more. Measurement time: 0.8s or less (200nm - Span or less), 1.5s or less (500nm - Span or less).

Advantest Q8383 Optical Spectrum Analyzer
Measurement range (wavelength): 550nm to 1750nm; Measurement range (level): -85 to + 10dBm; Input sensitivity: -55 to +10dBm; Accuracy: within ± .4dB.

Agilent 71400C Lightwave Signal Analyzer
Wavelength range: 750 to 870, 1200 to 1600nm. Modulation band-width: 100kHz to 22GHz. Sensitivity (optical): -62/-66dBm.

Agilent 71401C Lightwave Signal Analyzer
Wavelength range: 750 to 870, 1200 to 1600nm. Modulation band-width: 100kHz to 2.9GHz. Sensitivity (optical): -62/-66dBm.

Agilent 71450B Optical Spectrum Analyzer
Wavelength measurement range: 600nm to 1700nm; Input Sensitivity: -90dBm; Dynamic Range: 60dB. Used for testing LEDs, Fabry-Perot Lasers, or Distributed Feedback Lasers.

Agilent 71451B Optical Spectrum Analyzer
Wavelength measurement range: 600nm to 1700nm; Input Sensitivity: -90dBm; Dynamic Range: 60dB. Can characterize optical to optical devices such as couplers, filters, isolators, switches, and wavelength division multiplexers.

Agilent 71452B Optical Spectrum Analyzer
Wavelength measurement range: 600nm to 1700nm; Input sensitivity: -90dBm; Dynamic Range: 60dB. Used for testing optical amplifiers such as EDFA's and PDFAs (Erbium and Praseodymium Doped Fiber Amplifiers).

Agilent 8140A Hand-Held Optical Loss Test Set
Wavelength range: 400 to1700nm. Power range: +10 to-70dBm. Accuracy (at ref. cond.): ±5%. Accepts plug-in modules.

Agilent 81400A Optical Sensor
400 to 1100nm. For Agilent 8140A.

Agilent 81401A Optical Sensor
750 to 1700nm. For Agilent 8140A.

Agilent 81411A LED Module
850nm. For Agilent 8140A.

Agilent 81412A LED Module
1300nm. For Agilent 8140A.

Agilent 81413A LED Module
1550nm. For Agilent 8140A.

Agilent 8153A Lightwave Multimeter
Mainframe offers 2 slots for plug-in modules. Modules can be combined in any configuration. Can be used as a half channel power meter, as a half channel light source, as a loss test set, or even as a return-loss test set.

Agilent 81530A Power Sensor Module
Wavelength range: 450 to 1020nm. Power range: +3 to -110dBm., Display resolution: (dB): 0.001. Display resolution (W): 0.01pW. Accuracy (at ref. cond.) ±2.5% (600 to 1020nm).

Agilent 81531A Power Sensor Module
Wavelength range: 800 to 1700nm. Power range: +3 to -90dBm. Display resolution (dB): 0.001. Display resolution (W): 1pW. Accuracy (at ref. cond.) ±2.5% (1 000 to 1650nm).

Agilent 81532A Power Sensor Module
Wave length range: 800 to1700nm. Power range: +3 to-110dBm. Display resolution: 0.001dB. Display resolution (w): 0.01pw. Accuracy (at ref. cond.): -2.5% (1000 to 1650nm).

Agilent 81533A/81520A Optical Head Interface Module
Wavelength range: 450 to 1020nm. Power range: +10 to -100dBm. Display resolution: 0.001dB. Display resolution (W): 0.1pW.

Agilent 81533/81521B Optical Head Interface Module
Wavelength range: 900 to 1700nm. Power range: +3 to -80dBm. Display resolution: 0.001dB. Display resolution (W): 10pW.

Agilent 81541 Multimode LED Source Module
Central wavelength: 850µm ±30mm. 50µm multimode fiber output. Spectral bandwidth: 90µm. Output power: -17dBm.

Agilent 81542 Multimode LED Source Module
Central Wavelength: 1300µm ±40µm. 50µm multimode fiber output. Spectral bandwidth: 90dB. Output power: -20dBm.

Agilent 81542 Multimode Opt. 001 LED Source Module
Central wavelength: 1300µm ±40µm. 62.5µm fiber output (instead of 50µm). Spectral bandwidth: 90µm. Output power: -20dBm.

Agilent 81551 Multimode Laser Source Module
Central wavelength: 850nm ± 10µm, multimode. Spectral band-width: 1.5nm. Output power: -2dBm.

Agilent 81552 SM Laser Source Module
Central wavelength: 1310nm ±20µm, single-mode. Spectral band-width: 2.5nm. Output power: 0dBm.

Agilent 81553 SM Laser Source Module
Central wavelength: 1550nm ±20µm, single-mode. Spectral band-width: 4nm. Output power: 0dBm.

Agilent 81554 SM Laser Source Module
Central wavelength: 1310/1550nm ±20µm, single-mode. Spectral bandwidth: =2.5/4µm. Output power: -1dBm.

Agilent 8167A Tuneable Laser Source
Wavelength Range: 1280nm to 1330nm; Wavelength accuracy: less than ±0.lnm; Wavelength resolution: .001nm, 170MHz at 1300nm; Maximum output power: -4dBm.

Agilent 8168B Tuneable Laser Source
Wavelength range: 1500nm to 1565nm; Wavelength accuracy: less than ±0.lnm: Wavelength resolution: .001nm, 125MHz at 1550nm. Maximum output power: -4dBm.

Agilent 8168C Tuneable Laser Source
Wavelength Range: 1470nm to 1580nm; Wavelength Accuracy: less than ±0.lnm; Wavelength resolution: .001nm, 125MHz at 1550nm. Maximum output power: +4dBm.

Agilent 83400A/B Lightwave Source Module
Range: 300kHz to 3GHz. 1300nm, 9/125µm fiber. For Agilent 8702B.

Agilent 83401A Lightwave Source Module
Range: 300kHz to 3GHz. 1300nm, 50/125µm fiber. For Agilent 8702B.

Agilent 83402A/B Lightwave Source Module
Range: 300kHz to 6GHz. 1300nm, 9/125µm fiber. For Agilent 8702B.

Agilent 83403B Lightwave Source Module
Range: 300kHz to 3GHz. 1550nm, 9/125µm fiber. For Agilent 8702B.

Agilent 83404A/B Lightwave Source Module
Range: 300kHz to 3GHz. 850nm, 50/125µm fiber. For Agilent 8702B.

Agilent 83410C Lightwave Receiver Module
Range: 300kHz to 3GHz. 1300/1.550nm, 62.5/125µm fiber. For Agilent 8702B.

Agilent 83411C Lightwave Receiver Module
Range: 300kHz to 6GHz. 1300/1550nm, 9/125µm fiber. For Agilent 8702B.

Agilent 83411D Lightwave Receiver Module
Range: 300kHz to 6GHz. 1300/1550nm, 9/125µm fiber. For Agilent 8702B.

Agilent 83412B Lightwave Receiver Module
Range: 300kHz to 3GHz. 850nm, 62.5/125µm fiber. For Agilent 8702B.

Agilent 83420A Lightwave Test Set
Wavelengths: 1300 to 1550nm. Modulation bandwidth: 130MHz to 20GHz.

Agilent 83421A Lightwave Source
130MHz to 20GHz.

Agilent 83422A Lightwave Modulator
130MHz to 30GHz.

Agilent 83423A Lightwave Receiver

Agilent 83440B/C/D Lightwave Converter
Wavelength range: 1200 to 1600nm. Bandwidth (optical): DC to 6/20/32GHz.

Agilent 83475B Lightwave Communications Analyzer
Automated mask and-template measurements, integrated optical channel. Wavelength range: 780 to 1600nm. Two channel, 500MHz. General purpose oscilloscope. Built in optical power meter.

Agilent 83484A/B Electrical Modules
The 83484A's two channels and the 83484B's single channel offer selectable bandwidths of 26.5GHz or 50GHz.

Agilent 83485A/B Optical/Electrical Modules
Both modules feature two measurement channels, one optical, one electrical. Both channels have selectable bandwidth settings for selection between lowest oscilloscope noise and highest bandwidth (20GHz with the Agilent 82485A, 30GHz with the Agilent 83485B) for greater measurement fidelity on high speed signals.

Agilent 83810B Lightwave Signal Analyzer
Wavelength range: 1200 to 1600nm; modulation bandwidth: 9kHz to 22GHz; sensitivity (optical): - 4dBm.

Agilent 8504A Lightwave Precision Reflectometer
Wavelengths: 1300, 1500nm. Return loss range: 0 to 70dB. Measurement span: 1mm to 40cm (air). Two event distance resolution: 50nm (air).

Agilent 8509A Lightwave Polarization Analyzer
Wavelength range: 1200 to 1600nm.

Agilent 8702B Lightwave Component Analyzer
300kHz to 20GHz. 850, 1300, or 1550nm operation. Reflection measurements with <1 mm resolution up to 50dB optical dynamic range. Requires RF interface kit, lightwave source, lightwave receiver, and fiber cable.

Agilent 8703A Lightwave Component Analyzer
Standard configuration includes an internal 1300nm fabry-perot (FP) laser and one 1300/1550nm receiver. Optional 1300 or 1550nm DFB internal laser sources are also available. Opt. 001: Ext. lightwave source input. Used with the Agilent 83424A or 83425A lightwave CW sources for additional 1550 or 1300nm DFB wavelength flexibility.

Alcoa Fujikura FSM15S Single Fusion Splicer
Splicing is fully automatic by precision v-groove alignment. LCD monitor with adjustable brightness and viewing angle provides 100x magnification with perpendicular X and Y fiber images. Stores data for up to 100 splicers.

Alcoa Fujikura 20RS12 Mass Fusion Splicer
Splices 1.25 micron fiber up to .900 micron fiber. Fuses 1, 2, 4, 6, 8,10, 12 fibers at once; ribbon and loose fiber tube.

Laser Precision AM450 Optical Fiber Identifier
Determines the presence, direction and intensity of light in optical fiber. Applications: Dark fiber confirmation, determination of' signal direction, fiber traffic identification, patch cord tracing.

Laser Precision DB-2900A Optical Variable Attenuators
Low reflection. Low insertion loss. High accuracy. Calibrated to 60dB. Single mode 1310/1550nm. Bit error rate testing. Measuring optical loss margins on fiber systems. Optical power meter/test set calibration. Simulation of system loss. Optical component testing.

Laser Precision LP-5000 Hand Held Fiber Optic Power Meter
Simple 3 button operation. Measurement range: -65dBm to +5dBm. Accuracy: +0.3dB. Resolution: 0.1dB. FDDI testing. Cable acceptance testing. Splicing. Connectorization. End-to-end testing of installed links.

Laser Precision LP-5025 Fiber Optic Power Meter
Wavelengths: 850, 1310, 1550nm (26 calibrated wavelengths available). Measurement range: +1dBm to -70dBm. Output power: -7dBm typical.

Laser Precision LP-5100 Series Modulated LED Light Sources
Available in 850nm, 1300nm or 850/1300nm dual wavelength models. Continuous wave (CW) and modulated modes (270Hz, 2kHz).

Laser Precision LP-5200 Series Modulated Laser Light Sources
Available in 1310nm, 1550nm or 1310/1550nm dual wavelength models. Continuous wave (CW) and modulated modes (270Hz, 2kHz).

Laser Precision LTS-4410 Hand Held Loss Test Set
2 button control of instrument features. Independent 1310nm and 1545nm laser sources (with LED indicators). 22 detector wavelengths. Modulation detect LED indicates modulated signal in the range of 10 to 2500Hz is detected. Readings in dB. Auto ranging.

Laser Precision LTS-4510 Hand Held Loss Test Set
Same as 4410 except 4 button control of all instrument features. Either source may be CW or modulated at 30Hz or 2kHz. LEDs indicate the source transmission mode.

Tektronix P6701A Opto-Electronic Converter
Bandwidth: DC to 700MHz. Analog analysis of optical signals in the wavelength range 450 to 1050nm. Max. input optical power: 1mW. Opt. 02: Standard SMA input connector.

Tektronix TFC200 Optical Power Meter
Spectral range: 750nm to 1700nm; Calibrated wavelengths: 780, 820, 850, 1060, 1300, 1310, 1550nm; Dynamic Range: +10dBm to -70dBm; Accuracy: ±3%.

Request a Quotation
Back to list of Categories