HP 4192A RF Impedance Analyzer
5Hz to 13MHz variable measuring frequency. Measure 11 impedance parameters including resistance, inductance, capacitance and gain phase relationships.

HP 4193A Vector Impedance Meter
Measures impedance magnitude and phase. An internal oscillator provides test signals from 400kHz to 110MHz. The test signal is constant current between 10MW and 100MW, depending on impedance range.

HP 4194A Impedance/Gain Phase Analyzer
Impedance Measurements; (Test freq.) 100Hz - 40MHz;1ZI, R, X: 10mO to 100MO; lyl, G, B: 10ns to 100s, 0 - + 180°; L: 1nh to 100kh; c: 10 fF to IF; D: .001 to 10; Q: .1 to 1000.

HP 41941A Impedance Probe Kit
Impedance probe kit will perform reliable impedance evaluations up to 100MHz using the supplied calibration standards accuracy is guaranteed to the probe tip. Measurement range: 100MO to 1MO.

HP 4263A LCR Meter
Test freq.: 100Hz, 120Hz, 1 kHz, 10kHz, 100kHz. Test levels: 50m, 1 00m, 250m, 500m, 1 V rms. Measurement range R: 1mO to 100MO; C: 1pF to 1F; L: 10nH to 100kH. 0.1% basic accuracy.
For a handheld LCR Meter, see the TES-2712 LCR Meter

HP 4278A Capacitance Meter
Frequency range: 1 kHz and 1 MHz, + .02%; measurement parameters: C - D. Q. ESR. G; Signal level: .1 to 1 v rms, + 10%; c measurement range: (1kHz) .001pF to 200,000,µF, (1MHz high accuracy: .00001pF to 2663.00pF.

HP 4279A 1MHz C-V Meter
Frequency: 1MHz; measurement parameters: C-D, Q, ESR, G; test signal level: 20mV, 50mV, 100mV, 200mV, 500mV, and 1 v rms; C range: .00001pF to 1280pF.

HP 4284A Precision LCR Meter
Test freq.: 20Hz to 1MHz. 0.05% basic accuracy. Six digit resolution. Test signal level: 5mV to 2V rms. Measurement range R: .01MO to 99.9999MO; C: .01fF to 9.9999F, L: .01nH to 99.9999kH.
For a handheld LCR Meter, see the TES-2712 LCR Meter

HP 4285A Precision LCR Meter
Test freq.: 75kHz to 30MHz - 0.1% basic accuracy. Test signal level: 5mV to 2V rms. Measurement range R: .01MO to 99.9999MO; C: .01fF to 999.999,µF, L: .001nH to 99.9999H.
For a handheld LCR Meter, see the TES-2712 LCR Meter

HP 4286A RF LCR Meter
Frequency range: 1MHz - 1GHz; accuracy: 1.0%; measurement time: 15ms; measurement parameters: IZI, IYI, R, X, G, B, C, L, R, D, Q.
For a handheld LCR Meter, see the TES-2712 LCR Meter

HP 4291A RF Impedance/Material Analyzer
Impedance parameters: Z, Y, R, X, G, B, CP, CS, LP, LS, RP, RS, D, Q; operative freq. 1MHz to 1.8GHz; freq. resolution: 1MHz; osc. level: .2mV to 1 V rms (1MHz to 1GHz).

Request a Quotation
Back to list of Categories