HP 83522A RF Plug-In
For use with HP 8350A/B Sweeper. Freq. range 10MHz to 2.4GHz. Power output internally leveled to +0.25dB over entire range; power output >13dBm. Option 002: Programmable 70dB step attenuator.

HP 83525B Broadband RF Plug-In
Frequency range: 10MHz to 8.4GHz. Output power: + 2OmW/10mW. Option 002: Programmable 70dB Step Attenuator (10dB steps).

HP 83540A RF Plug-In
Frequency range: 2 to 8.4GHz. >40mW output. For use with HP 8350A/B sweeper. Option 002: 70dB Step Attenuator.

HP 83540B RF Plug-In
Frequency range: 2 to 8.4GHz. >20mW output. For use with HP 8350A/B Sweeper. Option 002: 70dB Step Attenuator

HP 83545A RF Plug-In
Frequency range: 5.9GHz to 12.4GHz. For use with HP 8350A/B Sweeper. Power leveled to ±.6dB. Power output level: 17dB. Option 002: 70dB Step Attenuator

HP 83554A Millimeter-Wave Source Module
Frequency range: 26.5 to 40.0GHz; maximum leveled power: +8dBm; Source output SWR: < 2.0.

HP 83555A Millimeter - Wave Source Module
Frequency range: 33.0 - 50.0GHz; Max. leveled power: +3dBm; wave guide output connector: EIA size WR22.

HP 83556A Millimeter - Wave Source Module
Frequency range: 40.0 - 60.0GHz; max. leveled power: +3dBm; wave guide output connector: EIA size WRl9.

HP 83570A RF Plug-In
Frequency range: 18 to 26.5GHz. Output: 10mW. For use with HP8350A/B Sweeper.

HP 83572C Plug-In
Frequency range: 26.5GHz to 40GHz. Maximum leveled output: >10mW.

HP 83590A RF Plug-In
Frequency range: 2 - 20GHz. Broadband plug in. 10mW max. leveled power. For HP 8350 series mainframes. Option 002: 70dB step attenuator.

HP 83592A RF Plug-In
Frequency range: .01 to 20GHz. Calibrated output power with 0.ldB resolution. HP-I B. Internal leveling and slope standard, +l0dBm from 0.01 to 20GHz. Option 002: 70dB Step Attenuator.

HP 83592B RF Plug In
Frequency range: 10MHz-20GHz. 5 bands: .01 - 2.4GHz, 2.4 - 7GHz, 7 - 13.5GHz, 13.5 - 20GHz, .01 - 20GHz. 20mW out put power to 18.6GHz;. Ext. AM: 15dB, int.: 30dB. Ext. FM pulse in TTL. Used with 8350.

HP 83592C RF Plug-In
Frequency range: 0.01 -20GHz. -55dBc harmonics. HP-IB. Internal leveling and slope standard. Leveled output: 4mW/2.5mW. Option 002: 55dB Step Attenuator.

HP 83594A Sweeper Plug-In
Frequency range: 2 - 26.5GHz; Maximum leveled power: 4 - 10dBm. Power variation: ±0.7 to ±0.9dB.

HP 83595A RF Plug-In
Frequency range: 0.01-26.5GHz with 0.ldB resolution HP-IB. Internal leveling and slope standard. Leveled output: 2.5mW. Option 002: 55dB Step Attenuator.

HP 83595C RF Plug-In
Frequency range: .01 to 26.5GHz. 20mW maximum leveled output power to 20GHz, 10mW to 26.5GHz.

HP 83620A Synthesized Sweep Generator
Frequency range: .01 to 20GHz. Output power +10dBm. Harmonics: -50dBc.

HP 83622A Synthesized Sweep Generator
Frequency range: 2 to 20GHz. Output power +10dBm. Harmonics: 50dBc.

HP 83623A Synthesized Sweep Generator
Frequency range: .01 to 20GHz. Output power +17dBm. Harmonics: -25dBc.

HP 83624A Synthesized Sweep Generator
Frequency range: 2 to 20GHz. Output power +20dBm. Harmonics: -25dBc.

HP 83630A Synthesized Sweep Generator
Frequency range: 10MHz - 26.5GHz; Resolution 1 kHz std.; Maximum leveled Power: +10dBm, 50O output impedance.

HP 83640A Synthesized Sweep Generator
Frequency range: .01 to 40GHz. Output power +2dBm. Harmonics: 40dBc.

HP 83642A Synthesized Sweep Generator
Frequency range: 2 to 40GHz. Output power +2dBm. Harmonics: 40dBc.

HP 83650A Synthesized Sweeper
Frequency range: 10MHz to 50GHz. Maximum leveled power: +2.5dBm; Output connector: 2.4mm. Resolution: 1kHz.

HP 83711A Microwave Generator
A synthesized CW generator that covers the range of 1 - 20GHz, 1kHz resolution harmonics; -50dBc; spurious (.3kHz) -60dBc; Meets or exceeds EN55011/CISPR 11/1190, Class "A" and mill-std 461C pt. 2 RE02/CE03/CS02/RS03.

HP 83712A Microwave CW Generator
10MHz to 20GHz frequency range; 1kHz frequency resolution: 0.01dB res. Recommended for use with the HP8970B noise figure meter.

HP 83731A Microwave Signal Generator
Frequency range: 1.0 - 20.0GHz; Output range: +10 to -90dBm; Frequency resolution: 1kHz: Modulation: pulse. AM/FM.

HP 83732A Microwave Signal Generator
Frequency range: .01 - 20.0GHz; Output range: +10 to -90dBm; Frequency resolution: 1kHz; Modulation: pulse. AM/FM.

HP 83751A Swept Frequency Synthesizer
Frequency range: 2 - 20GHz; Output power: l0dBm; Resolution: 1kHz; Modulation: pulse. AM/FM.

HP 83751B Swept Frequency Synthesizer
Frequency range: 2 - 20GHz; Output power: 17dBm; Resolution: 1kHz; Modulation: pulse. AM/FM.

HP 83752A Swept Frequency Synthesizer
Frequency range: .01 - 20GHz; Output power: 10dBm; Resolution: 1kHz; Modulation: pulse. AM/FM.

HP 83752B Swept Frequency Synthesizer
Frequency range: .01 - 20GHz; Output power: 17dBm; Resolution: 1kHz; Modulation: pulse. AM/FM.

HP 8642B Synthesized Signal Generator
Frequency range: 100kHz -2.115GHz. SSB phase noise at 20kHz offsets of 134dBc/Hz at 1GHz. +20dBm max. output level. AM, FM, IM and pulse modulation. Opt. 00 1: High stability time base.

HP 8643A Synthesized Signal Generator
Frequency range: 0.252 to 1030MHz. Resolution: 0.01Hz. Output level: +13 to -137dBm. Modulation: AM, FM and pulse. Remote programming interface: HP-IB (IEEE 488.2). SSB phase noise at 1GHz: -30dBc/Hz. Opt. 002: Frequency range: 0.252 - 2060MHz.

HP 8644B Synthesized Signal Generator
Frequency range: 0.252 to 1030MHz. Resolution: 0.01Hz. Output level: +16 to -137dBm. Modulation: AM, FM and pulse. Remote programming interface: HP-IB (IEEE 488.2). SSB phase noise at 1GHz: 136dBc/Hz. Option 002: Frequency range 0.252 - 2060MHz.

HP 8647A Synthesized Signal Generator
Frequency range: 250kHz to 1000MHz. Resolution 1Hz; Output range: +10 to -136dBm. 10 user definable sequences. Offers full HP-IB programmability and users SCPI programming codes.

HP 8648A Synthesized Signal Generator
Frequency range: 0.1 - 1000M Hz; Resolution: 1Hz; Output range: +10 to-136dBm; Modulation: FM, phase and AM; HP-IB.

HP 8648B Synthesized Signal Generator
Frequency range: 100kHz - 2000MHz; Resolution line: 1 Hz; Output range: +13 to -136dBm. Modulation: FM, AM and phase.

HP 8648C Synthesized Signal Generator
Frequency range 100kHz to 3.2GHz. Resolution 1Hz, output range +13 to -136dBm, and GPIB interface is standard.

HP 8656B RF Signal Generator
Frequency range: 100kHz to 990MHz. Resolution: 10Hz. Output level: +13dBm to -127dBm into 50O. AM and FM modulation. HP-IB programmable.

HP 8657A RF Signal Generator
Frequency range: 100kHz to 1040MHz. Resolution: 10Hz. Output level: +13dBm to -143.5dBm into 50O. AM and FM modulation. HP-IB programmable.

HP 8657B RF Signal Generator
Frequency range: 100kHz to 2060MHz image size. Camera will mount on a variety of scopes, spectrum analyzers and display monitors. HP-IB programmable.

HP 8657D RF Signal Generator
Frequency range: 100kHz - 1030MHz analog; Resolution: 1Hz.; Output range: +13 to -1 43.5dBm into 50O; Modulation: FM/AM and pulse.

HP 8662A Synthesized Signal Generator
Frequency range: 10kHz to 1280MHz. 147dBc/Hz SSB phase noise at 10kHz offset and 0.1Hz frequency resolution. Fully HP-IB programmable.

HP 8663A Synthesized Signal Generator
Frequency range: 100kHz to 2560MHz. Output level: +16dBm to 129.9dBm. Digital sweep. AM-FM modulation. Fully HP-IB programmable. Opt. 002: Wide band linear phase modulation.

HP 8664A Synthesized Signal Generator
Frequency range: 0.1 to 3000MHz. Resolution: 0.01Hz. Output level: +13 to -139.9dBm. Modulation: AM,FM. Remote programming interface: HP-IB (IEEE-488.2). SSB phase noise at 1GHz: -117dBc/Hz. Opt. 004: SSB phase noise at 1GHz: -134dBc/Hz. Opt. 008: Pulse modulation.

HP 8665A Synthesized Signal Generator
Frequency range: 0.1 to 4200MHz. Resolution: 0.01Hz. Output level: +13 to -139.9dBm. Modulation: AM, FM. Remote programming interface: HP-IB (IEEE-488.2). SSB phase noise at 1GHz: -117dBc/Hz. Opt. 004: SSB phase noise at 1GHz: - 4dBc/Hz. Opt. 008: Pulse modulation.

HP 8665B Synthesized Signal Generator
Frequency range: 0.1 to 6000MHz. Resolution: 0.01 Hz. Output level: + 1 3 to -1 39.9dBm. Modulation: AM, FM. Remote programming interface: HP-IB (IEEE-488.2). SSB phase noise at 1GHz: -17dBc/Hz. Opt. 004: SSB phase noise at 1GHz: -134dBc/Hz. Opt. 008: Pulse modulation.

HP 8780A Vector Signal Generator
Frequency range: 10MHz to 3GHz; Resolution: 1 Hz; Output: level range + 10dBm to -100dBm under 2.5GHz, +4dBm to -100dBm above 2.5GHz.

HP 8782B Vector Signal Generator
Frequency range: 1 MHz - 250MHz; Resolution: 1 Hz. RF output level: +7 to -100dBm; Digital modulation: BPSK, QPSK, 8PSK, 16QAM, 64QAM, 256QAM, 9PRS, 25PRS, 49PRS, and 81 PRS.

HP 8954A Transceiver Test Interface
Frequency range: l00kHz-18GHz. Test interface used with HP 8901A, HP 8903B and HP 8656B.

Wavetek 1062 Sweep Generator
Frequency range: 1 MHz - 500MHz; output power: +10 to -55dBm; impedance: 50O; modulation: AM/FM.

Wavetek 1080 Sweep Generator
Frequency range: 1MHz - 1000MHz; output: +13 to -70dBm; impedance 50O; modulation: FM.

Wavetek 1081 Sweep Generator
Frequency range: 1MHz - 1000MHz; output power: +60 to -70dBmV; impedance: 75O; modulation: FM.

Wavetek 178 Programmable Wave Form Synthesizer
Frequency range: 1µHz to 50MHz; wave forms: sine, triangle, square, ramps and burst at 20V p-p into 50O. ±l0V DC offset. lµHz resolution. GPIB. Sweeps, continuous and triggered. Opt. 002: High stability frequency reference.

Wavetek 1801C Sweep/Signal Generator
Frequency range: 1MHz to 1000MHz. Output power: -33dBmV to +57dBmV. Opt. A- 1: Single frequency marker. Opt. A-2: Harmonic type marker. Opt. A-8: UHF option (450 to 950MHz).

Wavetek 2001 Sweep/Signal Generator
Frequency range: 1-1400MHz, 3 ranges. Sweep width: 200kHz - 500MHz. Calib. 10MHz/div. Sweep rates: 10ns - 100s. Impedance: 50O. Output: +10dBm max. Modes: recurring, single sweep, ext. trigger, manual. Line markers available.

Wavetek 2002B Sweep Generator
Frequency range: 1MHz - 2500MHz; output power: +13 to -77dBm; impedance: 50O; modulation: AM/FM.

Wavetek 2405 Signal Generator
Frequency range: .01 - 550MHz; Resolution: digital display .l Hz; Output level: -127 to + 13dBm; Modulation: AM/FM. Flatness: ± 1dB.

Wavetek 2410 Signal Generator
Frequency range: .01 - 1100MHz; Resolution: digital display .l Hz; Output level:-127 to +13dBm; Modulation: AM/FM. Flatness: ±1dB.

Wavetek 278 Programmable Synthesized Function Generator
Frequency range: 0.01 Hz-12MHz. Resolution: 5 digits. Wave Forms: sine, triangle, square, pulse, external width or DC. Outputs: 10V p-p into 50O. Accuracy: 5ppm. Amplitude resolution: 3 digits. Offset resolution: 3 digits. Volatile memory for 40 stored settings.

Wavetek 295 Arbitrary Wave Form Generator
50MHz sampling frequency with 1ppm accuracy. Up to 4 independent channels. On screen graphical interface and mouse (included). 12 bit vertical resolution 32K (128K optional) horizontal points per channel. IEEE 488.2 and SCPI compatible.

Request a Quotation
Back to list of Categories